- Specs: Arbor 5/8", Diameter 10", Grind TCG, Hook Angle -3°, Kerf .091", Plate .071", Teeth 80.
- Premium TiCo HI-Density Carbide Laminate Blend for Maximum Performance.
- Triple Chip Grind (TCG) Tooth Design with a positive hook angle for long life in production applications.
- Thin Kerf requires less power and allows for faster feed rate.
- Perma-Shield Non-Stick Coating reduces blade drag, protects the blade from corrosion and pitch build-up..
Product Description
-------------------
10" Thin Kerf Double Sided Laminate/Melamine
.com
----
The 10-inch Freud LU96R010 Thin Kerf Double Sided Laminate
Cutting Saw Bladeis designed to make quick, smooth, chip-free
cuts when working with laminates, melamine, and veneered plywood.
It features Freud's Perma-SHIELD coating, and a triple-chip tooth
grind, the long-term dependability of TiCo high-density carbide,
and a series of laser-cut, anti-vibration slots.
Triple-Chip Grind and Negative Hook Angle for Chip-Free Laminates
Built to leave a high-quality, chip-free finish on both the top
and the bottom of double-sided laminates and sheets of melamine,
this blade features 80 teeth with a triple-chip grind. The
blade's teeth also feature negative hook angles, which further
reduces the possibility of chipping and helps ensure maximum
tooth life. And the blade is so effective that there's no need to
use a scoring blade with it.This blade is designed for optimal
performance when cutting laminate or melamine that ranges from
1/4 to 1-5/8 inches in thickness. It's also a solid performer
when crosscutting wood or working with plywood and chipboard.
This blade can even rip wood, and it can tackle thinner or
thicker materials. However, some loss of surface finish may occur
when it is used outside its ideal range. It has a 5/8-inch arbor
and produces a 0.091 kerf.
And, since it's a thin-kerf blade, it requires less horsepower
than standard carbide blades to produce a quality finish, and it
supports faster feed rates.
Well-Balanced, Anti-Vibration Design
This Freud blade is precision balanced and pretensioned for truer
cuts under heavy loads. It also features laser-cut,
anti-vibration slots that reduce chatter for a cleaner finish,
longer blade life, and reduced noise while you work. And because
the entire blade is laser cut from high-strength steel, you can
trust that it will stay stable, flat, and true, even after
prolonged use. Furthermore, this well-balanced, anti-vibration
design means there's no need to use add-on stabilizers with this
blade.
High-Density Carbide for Maximum Cutting Performance
This laminate saw blade's 80 teeth are finished with tips made
from Freud's application-specific TiCo high-density carbide
"laminate blend." Formulated to extend tooth life in the face of
work with laminates, melamine, and solid surfaces, this blend is
extra hard--due to the proportion of high density tungsten
carbide that goes into it--and it still offers the mix of
improved corrosion resistance, heat resistance, and impact
resistance that you expect from TiCo.
With teeth that start out sharper and deliver improved edge
retention, the blade can go longer between sharpening. and will
hold up longer--saving you time and money.
Perma-SHIELD Coating Reduces Friction and Heat Buildup
Built to withstand tough use in less-than-ideal conditions, this
blade is finished with Freud's red Perma-SHIELD--a non-stick
coating that reduces friction and nearly eliminates the heat
buildup that excess friction can cause. By providing complete
thermal insulation, this coating protects your tools and your
work surface. And it resists binding when the blade is used for
large-volume cutting applications, which reduces blade warp.
As a lubricating feature, Perma-SHIELD allows the blade to spin
freely while reducing stress on the motor and carriage of your
saw. In addition, this coating helps prevent debris collection
and resin or "pitch" buildup. Since gummy pitch buildup causes
extra drag on the motor of your saw, less buildup is another
little convenience that translates into longer tool life and
longer blade life. It also means less downtime for blade
cleaning, so you get jobs done faster.
This industrial saw blade is backed by Freud's limited lifetime
warranty.
About Freud: A History of Innovative Manufacturing
An industry leader for more than 50 years, Freud America, Inc. is
a manufacturer and marketer of superior carbide cutting tools for
the woodworking industry. Freud is one of the few manufacturers
of woodworking tools in the world that produces its own
MicroGrain Carbide with Titanium, called TiCo, a high-density
combination of Titanium and Cobalt.
By producing their own carbide, Freud has the unique ability to
formulate each tool for each specific application, thereby
maximizing the cutting life and performance of the tool. Freud's
full line of high-quality, woodworking tools includes saw blades,
router bits, shaper cutters, power tools, and more.
What's in the Box
Freud LU96R010 Thin Kerf Double Sided Laminate Cutting Saw
Blade--10-inch diameter, 5/8-inch arbor, 80-tooth design.
P.when('A').execute(function(A) {
A.on('a:expander:toggle_description:toggle:collapse',
function(data) {
window.scroll(0, data.expander.$expander[0].offsetTop-100);
});
});
From the Manufacturer
---------------------
10"x80tooth industrial thin kerf double side laminate blade TCG
See more ( javascript:void(0) )